man, just spent some time in that thread on Sailing Anarchy...you guys did start quite a storm. It's all in the wording. Nice that it appears to be resolved and I think you guys are headed down a good path. Contrary to some of the talk, it would be much more affordable to retrofit a standard "ocean hugging" boat with bottom-up installed foils to get it airborne than to go through the contortions of modifying the hull to accept some really oddly shaped daggerboard only to find out another oddly shaped daggerboard works better (and now it won't fit). A fore-aft top adjustment doesn't have to be buried in the trunk either and could just be bolted to the top of the deck.

Personally, after seeing the result of the phantom in the surf during the Florida 300, I'm waiting for someone to build a hull where the dagger board trunk opens through the side of the hull so the foil can be fully raised and permit sliding onto the beach. There are a lot of considerations there but I'm sure it can be done....heck, build the structure on the side of the hull like an old-school leeboard and unpin the entire structure when approaching the beach.