And here an example of a similar type of hull with a skeg
This is a Nacra 500
The skeg is here smoothed into the hull shape but I suspect we can do the F12 hull shape as a daggerboard design and just omit the daggerboard trunks and inject a flat plate at the keel line. Make slots in the bulkheads and just laminate it in.
We may even do it in one go. Use the skeg to align the bulkheads.
Wouter
Last edited by Wouter; 05/14/0901:06 PM.
Wouter Hijink Formula 16 NED 243 (one-off; homebuild) The Netherlands