sorry for the delay, yes bought it, picked up old trailer from H 16, modified it once back home with load spreading at contact points, broke main halyard in Outer Banks on first raising of main, had some questions re mast rake as boat seemed to not be set up correctly re stay lengths, received video from Bimare after month of emailing, but it does not address stay lengths, also the pin attached to front aspect carbon mast base seems to suggest raising mast from forward using this as pivot point, but this seeems horribly risky and unstable vs raising mast from aft with both sidestays connected and ready to stabilize mast once vertical, just waiting for forestays to be attached, any one have correct lenghts fore side and forestays, are adjuster plates typically used on sides, and are high tensile lines used for final adjustments on forestays ? have owned Solcat 18 TheMightyHobie18, H20 and having line vs wire for standing rigging seems fragile for a rig this size