Doug,

That is the design to be sailed from the ****. Original design was for the Worrell 1000 when it was an open class all out non stop race.

I'm taking it one step further. We are adding 4 inches of freeboard to the ama's so they will be around 22" tall max and 13" beam max. I'm thinking about rigging it so it can be sailed both from the **** and from the windward side, at least get the crew on the wire. Once the prototype is done and raced some I'll see what I'll do next, modify or make a mold. My plan is to go into limited production. I have not figured out the cost yet. The prototype cost just went up when I went from an aluminum mast to carbon fiber and the hulls from E-glass to carbon fiber, but that is half the fun.

I don't want to stomp on this posting so I'm going to do an update on the TMS-20.