Strip planking is very time consuming compared to bending divinycell/foam into a female mould and laminating. Ref: http://woodastic.blogspot.com/
Rolf, Your blog is very interesting since I have i have a supply of 6mm clear pine strips 5m long.... What cloth did you use for the outside and the inside of your Blade?
I made a fuselage for a scale model glider using balsa strip in the same way as you built your Blade - left /right halves but when it came to joining I had problems with warping/ twisting. Eventually I tapped them together and when it cured I discovered that the fuselage had a built in twist.... did you have any problems with twist in the left and right halves?
