I am planning to layup the foam using a single layer of 200g/sq m carbon cloth with a double layer in the centre of the hull from the chainplate area to the 1m for'ard of the front beam. Outside layer of carbon will be 0/90 in one layer ( the cloth is 1.5m wide ) and the inside layer will be -45deg/ +45 deg with a double layer in the centre of the hull from aft of the centreboard to for'ard of the front beam.
Is this enough?
I also plan to have a sheer clamp from Divinycell and cover is carbon fiber to help increase the gluing are when I glue the deck to the hull. An alternative is to use a timber sheer clamp instead. Any thoughts on this?
