Originally Posted by macca
Check the rule on batten pocket width. Then go measure yours....

While you are at it you can remove your dyneema trap lines smile


The traplines are legal.
From the IF18CA december minutes:

F.6.2 CONSTRUCTION
From 1st January 2011
(a) MANDATORY
(1) A forestay and bridles of 1 x19 stranded wire of minimum diameter of 4.0mm.
(2) Shrouds of 1 x 19 stranded wire of minimum diameter of 4.0mm.
(3) Trapeze wires of stranded wire or textile with a minimum diameter of 2.5mm.
(b) OPTIONAL
(1) A pair of diamond wires of 1 x 19 stranded wire of minimum diameter of 4.0mm.
The compliance date of 1st January 2011 would give any affected boats 12 months to comply.

Will measure my batten pockets later, you could just be making that up grin