Rigging:

Side stays fitted with Ronstan fine adjustment

3 front stays.....
a/ split stay setup for cat rigged
b/ sloop stay and bridle
c/ cat rig with spinnaker single stay and bridle to suit

1 pair of Dyneema adjustable length trap wires
2 pairs of 2mm wire and loops

Ronstan 'Orbit Block' 7:1 mainsheet system

clip-on jib blocks and sheets

Ronstan 40mm ratchet blocks with 6mm sheet.

Boyer blades with EDPM covers

Stainless steel rudder stocks

Glass coated cedar centreboards.




Sails:

Ashby Main with fibrefoam batterns (circa 2006)

Goodall Main (circa 2002)

Horizon Jib

Irwin Spinnaker (circa 2007)



Spars:

Anodised mast with spanner rotation setup
8:1 external haul down system
spinnaker hound loop and "on water" adjustable diamond tensioners with a fixed spreader.

Alloy square section boom with 4wheel car out-haul
spare 2 arrow mast type boom

Carbon-fibre spinnaker pole with internal halyard, tack and control blocks
Blade 16 fibreglass/graphite spinnaker mouth with trampoline material as the spinnaker chute.


Other stuff:

lightweight & well balanced galvinised registered trailer

fibreglass sailbox

barrel beach rollers

Mosquito tuning manual

Mosquito assoc plans with additional building instructions