I also spent a few hours on the lathe machining up some steel discs....

the discs prior to being machined up....



now it may seem a bit of an odd thing to be doing but there is as usual a reason behind them..... and that is the one thing we've not repaired/cleaned/altered/replaced/painted/resined or polished......

I sure as hell aint using these.....



the steel discs will when finished allow me to roll 20mm alloy square tube into a nice tight circle..... and then with a wave of the magic wand I'll hopefully have a nice pair of rudder boxes.....

thats if it works



stay tuned......