lay the board down on the boat but only allow one end to contact the boat, as soon as you have it centralised the staple-gun and a cord is placed in the middle and a staple is fired into the deck.... then lay the other end down and again cord and staple it once its central.
next step is to 'tie' the board down, I start in the middle of the deck and work my out
Once its tied down I then start the stapling, the cord as I've shown in the past is to rip the staples out when the resin cures. In this pic I'm half way through the stapling.
Yar, & this ere post be done without a sin'le drop o' rum passin' me lips
Kingy started with Impara Cadet #3 / Mosquito #245 & now Mosquitos #1182 & #1740