added some stiffeners to the sail-box lid.....

these bits are folded and have a "safety fold" on the edge so cold hands don't get cut & they wont cut into the stored gear whilst traveling, they are glued and riveted into place and are a nice solid addition.




there was just a bit too much flex in the lid and I was concerned it may get kinked so I added 4 pressed up colorbond bits to cope with the additional stresses the lid may come under... & with 2 young kids the likelihood that one of them will climb between the boat and box is .... well .... going to happen.
The lid will support their weight now without suffering too much