The stbd hull side has been laminated in two parts.
The end of **** forward and then back.
In both cases I weighed everything that went in and out and in both cases
the resin content worked out at 46.5% of the total laminate weight. Below are a couple of pics.

Stbd side forward section under vacuum.
[Linked Image]

In this pic I'm removing the absorption fabric and excess resin. The peel ply is left in place for now.

[Linked Image]

Attached Files
Stbd Laminate.jpg (855 downloads)
Last edited by phill; 03/15/14 05:09 AM.

I know that the voices in my head aint real,
but they have some pretty good ideas.
There is no such thing as a quick fix and I've never had free lunch!