I haven't got around to taking the pics of the hulls together but i have a few other pics that I'll post as I find the time.
Once the outside has been laminated I need to gain access to do some work on the inside.
This is simply done by cutting holes in the deck. Doing the work and then repairing the hole.

The pic below shows a hole I cut in the foredeck to install a compression strut and glass the inside seems.


In order to repair the hole a glass plate is made using the deck as a mould. The plate is then glued to the section of deck.


With the floats suspended from above i thought of a novel way of clamping the glue joint when making the repair.