I haven't been able to touch the boat for the last week and it looks like it will be a few more weeks before I can get back to the boat. I did get to snap a couple of pics of where I'm up to earlier this arvo.



I got out my laser level to mark the frames so they can be trimmed and all support the boat evenly when on the trailer. I have a couple pics below. One time exposure showing the laser line. Held by hand so no super clear. But then photography was never my strong point.


The cradle will now be lifted off and all the excess timber and glass will be trimmed before all the bare timber is laminated with triax glass & epoxy.

Then the cradle will be lined with marine carpet, the hull set in it and work will commence on the cabin top and windows etc.